Juste pour remplir




Glued laying
The glued laying mode is suitable with engineered and solid wood flooring, and particularly with low temperature under floor.
Store the parquet
Before laying, the parquet must be stored in a dry and heat room. We recommend to let unfinished wood flooring stabilize 7 days before laying. If it is varnished or oiled parket, packages should be opened right before laying.
Etat du support et de la pièce

Laying an insulator is necessary to avoid a humidity absorption. With glued laying mode, Design Parquet recommends you to use ISO ALU TB, useful for a support with a humidity rate < 10%.
The support must be:
 flat: 2 mm flatness under a 2 m rule ;

sec: humidity rate < 3 % ;
rigide and adherent
L
a The room in which the wood flooring is layed must be heaten, with a temperature between 15°C and 25°C. The ambiant air hygonometry must be between 45% and 65%. Make sure the support is clean before laying. When starting, open several packages in order to spread harmoniously the parquet boards. It is essential to incorporate the absorption of the wood. To do so, use an absorption joint along the walls 5 to 10 mm and 15 mm if the room exceeds 8 m width. 

Different glued laying modes

Full gluing parquet
This the most common method. It consists of small surfaces to be glued (about 0.5 m² each application for a better gluing). Apply the glue using a toothed spatula, by consecutive slices of 30 cm width before laying the parquet. Do not hesitate to press firmly if it is an unfinished parquet. Design Parquet recommends to use Navycol PS, about 1.2 kg per sqm. 
 The gluing is possible on concrete, concrete slab, conglomerate, old rigid parquet, adherent paving and plywood.

 Glued laying cord
The gluing is done with a polyurethane mastic. Apply beads of adhesive with 10 to 15 cm spacing each other and perpendicular to the boards. This method is suitable with tongue and groove.  The gluing is possible on concrete, concrete slab, conglomerate, old rigid parquet, adherent paving and plywood.

When the laying is over

Unfinished parquet: Once the parquet is layed, wait 3 to 4 days so that the wood stabilizes.
Varnished parquet: You can normaly use the room within 48 hours from the time of laying.